The Best Tool For Cutting Metal Roofing

Metal roofing must be slashed with the right equipment and technique. Roofs can be permanently damaged without them. Prior to working on metal roofs make sure your workspace is prepared; wear PPE as well as follow the safe cutting procedures.

Starts with pencil marking the cut line on the metal sheet. Ensure the line is straight and double-check measurements.

Circular saw
From durable and weatherproof surfaces that will last, to reducing the amount of wasted materials and labor, precise metal roof cutting is the key to a good project. And you have to have the right tools and techniques to do the job right.

: First, get a metal cutting blade for a circular saw. Blades come in various styles for all sorts of different saws and uses, so you’ll find one that works for you. Then, two swivel clamps are what you’ll need as you work.

Once your workspace and tools are set, trace where you want to shave your metal. When you have done that, cut along this drawn line with tin or aviation snips using sharp blades you keep at all times while you work.

Tin snips
Tin snips are hand tools that cut metal sheets without an electrical cord and they are the perfect tool for when powered cutters would be difficult or inefficient. Their precision cutting is seamless, and they’ll get a lot less fatigued by repeated usage. There are different versions today with various blades and handles.

Tin snips made of straight blades cut accurately on straight runs. Compound tin snips emphasise leverage and mobility. – Duckbill tin snips have curved blades for cutting slicing curves and circles, and are light duty enough to flop over in thicker metals.

Tin snips are like other hand tools in that they don’t create sparks, and are therefore relatively safe to use, although gloves should still be worn in case you ever get burnt. Users should also use these snips safely to avoid harm due to rust or scrap from cutting.

Angle grinder
Metal roofing panels can be cut accurately with the proper tools, but that’s not always possible. Or else you can ruin the roof and your own body in the process. Here are a few steps that can be used to prevent this from happening.

But first find your PPE (personal protective equipment). Then lay your metal sheets out on a steady work table or sawhorse and clamp them in place so you don’t shake while cutting. Find out the lengths of each panel by hand and trace with a marker pen their cutting lines.

This is the hand tool that you need for cutting straight lines in metal roofs with your fingers, tin snips are sold at most hardware stores and come in various sizes. Purchase left- or right-handed models that cut only certain things, such as squishing corners in your panel or cutting corrugated metal, pipes, fence or rebar. Or, a machine angle grinder with a metal cutting wheel would work too.

Reciprocating saw
When cutting metal roofing tiles to the right size, getting the right equipment and making sure you don’t make an error is important. With the wrong tools, it might damage the sheets making them useless – and using the right tools will save you time and money by cutting to factory-standard.

Metal cutting saws of various kinds are available in the market. Some are made for some materials or roof types better than others; you have your selection of circular saws with metal blades, power shears or tin snips.

Circular saws with metal cutting blades work well for sweeping lines that need to be easy to carry and precise. Because they’re lightweight and quick to move, they are easy to ram, easy to cut, and they get it right every time. If your job calls for more difficult or specialty cuts like curves or specialty shapes, a nibbler is the way to go. Nibblers puncture very fast and the puncture is as little distorted as possible. Wear PPE (personal protective equipment) at all times.